Most appliance breakdowns do not happen suddenly. A refrigerator compressor works harder for months because the condenser coils are matted with dust. A dryer takes longer and longer to dry because lint is building up in the vent. A dishwasher leaves film on glasses because the filter has not been cleaned in a year. By the time you notice, the appliance has been under stress for a long time.
Fix Cheetah offers appliance maintenance and diagnostics in Vancouver and across Metro Vancouver, the Fraser Valley and BC, for homes, rental properties and businesses. A maintenance visit is hands-on: we clean the parts that need cleaning, test the components that commonly fail and report back on anything that needs attention.
We also offer standalone diagnostic appointments when an appliance is behaving strangely but has not failed outright, or when you want a professional opinion before deciding whether to repair or replace.
What a maintenance visit covers
Each appliance gets a service suited to how it works and how it tends to fail. Typical tasks include the following.
- Refrigerators: condenser coil cleaning, door gasket inspection, drain line check, fan and temperature testing
- Dryers: lint path and vent inspection, airflow check, drum seal and belt inspection
- Washers: door boot cleaning and inspection, drain pump filter cleaning, hose inspection
- Dishwashers: filter and spray arm cleaning, door gasket check, drain and fill checks
- Ranges and ovens: burner and igniter inspection, element testing, temperature calibration check
- Range hoods: grease filter cleaning and blower operation check
Dryer vent safety
Lint build-up in dryer vents is a well-known fire risk and one of the most common reasons dryers overheat, trip thermal fuses and take too long to dry. Long vent runs in condos and townhomes, crushed foil ducts behind the dryer and blocked exterior dampers all restrict airflow. We inspect the vent path, clear lint from the dryer and accessible duct sections, and recommend improvements where the venting itself is the problem.
Detailed diagnostics
When something is not right, a proper diagnosis saves money. Our technicians use multimeters, temperature probes, manometers for gas appliances and manufacturer service modes to test components individually rather than guessing. You receive a clear explanation of what we found, what caused it and what the repair will involve, along with a transparent upfront quote.
A diagnostic visit is also useful before buying a home, taking over a rental property or deciding whether an older appliance is worth repairing.
Maintenance plans for homes and properties
For households with several appliances, and for landlords and property managers with multiple units, a scheduled maintenance plan keeps everything on a regular cycle. We can set up recurring visits that cover your appliances on a schedule that makes sense for how heavily they are used, and keep notes on each unit so we can spot trends over time.
Coastal humidity, hard-working laundry in family homes and heavy use in rental suites all increase wear, so regular service can make a real difference in the lifespan of appliances in BC homes.
Simple habits between visits
We will also show you the small things you can do yourself, like cleaning the lint screen every load, wiping the washer door boot, cleaning the dishwasher filter monthly and keeping the space around the refrigerator clear so it can breathe.
What we take care of
Refrigerator running constantly
Dirty condenser coils and a failing condenser fan force the compressor to work harder. Cleaning and testing restores efficiency.
Dryer taking two cycles to dry
Restricted venting or lint build-up reduces airflow. Clearing the vent path improves drying time and reduces fire risk.
Washer smells musty
Residue and mould in the door boot, drain pump filter and detergent dispenser cause odours. Cleaning and correct detergent use fix the problem.
Dishwasher leaving film or food residue
Clogged filters, blocked spray arm holes and scale build-up reduce cleaning performance.
Oven cooking unevenly
A weak element, failing convection fan or drifting temperature sensor can cause uneven results, detected during a diagnostic check.
Intermittent faults that are hard to pin down
Detailed testing and service mode diagnostics help us find intermittent problems before they become full failures.
Range hood not clearing smoke
Grease-clogged filters and failing blower motors reduce ventilation, which we clean and test during maintenance.
Diagnostics & Maintenance brands we service
Warranty-authorized & factory-trainedTHE GO-TO TECHNICIANS
- GE· Warranty-Authorized
- LG· Factory-Trained
- Miele· Factory-Trained
- Samsung· Factory-Trained
- Whirlpool· Factory-Trained
Also serviced
See every brand we repair →Diagnostics & Maintenance FAQ
How often should my appliances be serviced?
Once a year suits most households, covering refrigerators, laundry and dishwashers. Heavily used laundry in rental buildings or large families may need more frequent attention, and we can recommend a schedule after the first visit.
How often should my dryer vent be cleaned?
At least once a year for most homes, and sooner if drying times creep up or the dryer feels unusually hot. Long vent runs in condos and townhomes tend to clog faster.
What is included in a diagnostic visit?
A technician inspects and tests the appliance, reads any error codes, identifies the cause of the problem and explains the repair options with a transparent upfront quote before any work is done.
Do you offer maintenance plans for rental properties?
Yes. We set up recurring maintenance for landlords and property managers, covering appliances across multiple suites and keeping service notes for each unit.
Can maintenance really extend the life of an appliance?
Yes. Clean condenser coils, clear vents and clean filters reduce strain on compressors, motors and heating components, which are among the most expensive parts to replace.
Can you check an appliance before I buy a home?
Yes. We can inspect and test the appliances in a home you are purchasing or a rental you are taking over, so you know what condition they are in.
Diagnostics & Maintenance service locations
Local technicians based in Surrey and Whistler, serving Metro Vancouver, the Fraser Valley and Sea-to-Sky daily, with scheduled trips to the Sunshine Coast, Vancouver Island, the Gulf Islands and the Interior.